EngRig
For Sony, Panasonic, JVC Full size shoulder camcorders.
The EngRig is the best solution for ”front heavy” full size shoulder camcorders.
The camera front is supported by the “Active Suspension Support Pod” and a comfortable padded support belt.
The support attachment connected to the camera bottom allows normal use of the original Quick Release plate or Matte Box rods.
The adjustable support point can balance virtually any shoulder camera size.
The EngRig takes off the load from the arm, and most of the load from the shoulder.
It maintains the camera’s horizontal level and absorbs walking shots shakes.
The support pod can be locked for long static shots or unlocked for smooth suspended tilts, pans, smooth walking shots and any other camera maneuvers.
The EngRig is the best solution for ”front heavy” full size shoulder camcorders.
The camera front is supported by the “Active Suspension Support Pod” and a comfortable padded support belt.
The support attachment connected to the camera bottom allows normal use of the original Quick Release plate or Matte Box rods.
The adjustable support point can balance virtually any shoulder camera size.
The EngRig takes off the load from the arm, and most of the load from the shoulder.
It maintains the camera’s horizontal level and absorbs walking shots shakes.
The support pod can be locked for long static shots or unlocked for smooth suspended tilts, pans, smooth walking shots and any other camera maneuvers.
EngRig Support
List $ 363 Order Now
The EngRig Support is supplied with: A Gimbal (for 15mm Rods), Shock Absorbing Support Pod, Velcro Padded Support Belt and a Spring Clip Holster + equipment pouch.
EngRig QR Plate & Rods
List $ 303 Order Now
The EngRig Plate & Rods is supplied with: V mount QR Plate and a pair of 200 mm long 15 mm Dia. Rods.
EngRig Combo
List $ 572 Order Now
EngRig Combo is supplied with: V mount QR Plate, 2 x 200 mm long 15mm Dia. Rods, Gimbal (for 15mm Rods), Shock Absorbing Support Pod, Velcro Padded Support Belt and a Spring Clip Holster + equipment pouch.
" Camera operators shoulder mount for varied reasons and, to that end, everyone's mileage is their own. If you do need an aid to help you shoulder mount a heavy camera virtually effortlessly, enable you to be free from the confines of a tripod, a rig system that can be ready for operation in less than 60 seconds with the same ability to dismantle and with the added benefit that the whole rig can pack down into something that can be carried with ease, then the DV Eng Rig is well worth a look at. "
Stewart Menelaws (Director of Photography)
Stewart Menelaws (Director of Photography)
| engrig_manual.pdf | |
| File Size: | 236 kb |
| File Type: | |





